Regal V6-3.8L VIN K (1997)
-
Replace with new grommets, P/N 25534749 (package - qty.5).
-
Two packages will be needed. Save the other four grommets for future repairs.
3. Apply medium strength thread lock compound (blue), GM P/N 12345382 (in Canada use P/N 10953489) or equivalent, to the six valve cover
bolt threads.
Tighten
Tighten the valve cover bolts to 10 Nm (89 lb in).
11. Install the left engine mount strut bracket assembly to the cylinder head (1).
1. Install the left engine mount strut bracket nuts and stud.
2. Install the stud holding the electronic ignition control module ground and left engine mount strut bracket assembly to the cylinder head.
Tighten
Tighten the left engine mount strut bracket nuts and stud to 50 Nm (37 lb ft).
12. Install all six spark plug wires to the ignition coils.
7mm Four-Wire Retainer P/N 88891792
13. Install a 7 mm four-wire retainer, P/N 88891792 (1) (Qty 5/pack) to spark plug wire number 4, then to spark plug wires 1, 3 and 5. If not available,
use 8 mm spark plug four-wire retainer (1), P/N 14066248 (Qty 10/pack), or equivalent 7mm aftermarket spark plug wire retainer. Save the other 7
mm or 8 mm spark plug four-wire retainers for future repairs.
7mm Two-Wire Retainer P/N 12132229
