Regal V6-3.8L VIN K (1997)
guide will be updated with this new information.
1997 - 2003 3.8L L67 Left Valve Cover Gasket Replacement Along with Removal and Installation of Retainer for 1-3-5 Spark Plug Wires
Important
Clean the area around the tube/oil fill cap before removing the tube/oil fill cap in order to prevent contaminants from falling into the
valve cover opening.
1. Remove the fuel injector sight shield (1).
1. Twist counterclockwise to unlock the tube/oil fill cap from the valve cover.
2. Remove the upper intake manifold cover nut holding the fuel injector sight shield to the fuel injector rail brace stud.
3. Lift the fuel injector sight shield up at the front and slide the tab out of the engine bracket.
4. Re-install the tube/oil fill cap in the valve cover to prevent engine oil contamination.
2. Remove the left engine mount strut (2).
1. Remove the bolt and the nut from the left engine mount strut at the left engine mount strut bracket on the engine (1).
2. Remove the bolt and the nut from the left engine mount strut at the left engine mount strut bracket on the upper radiator support (1).
3. Remove the engine mount strut (2).
3. Remove the 1-3-5 spark plug plastic retaining channel (cover) clip/bracket from the engine and discard (1).
