Regal V6-3.8L VIN K (1997)
Body Control Module: Component Tests and General Diagnostics
Body Control Module (BCM)
This vehicle is equipped with a computer system capable of performing multiple engine and body control functions. Vehicle components (locks, keyless
entry, etc.) are controlled directly by their system module. Each system communicates with other systems on an interconnecting bus or serial data link.
These systems are all part of the vehicle's computer system providing two-way communication between various engine and body control systems.
Some electrical components are directly connected and controlled by their system module. Other systems accomplish this by sharing data information
with other systems on the serial data link to execute various vehicle functions. All system data information (sensors, switches, etc.) can be monitored by
any system module that completes the computer system.
All systems on the same serial data link use a communication process similar to a telephone system, where enormous amounts of information can be
exchanged on a single data wire.
Communications between each system is accomplished by sending a digitally coded message, consisting of specific information a system module must
follow. Each system module is assigned its own recognition code (address). So when a message is sent out on the serial data link, only the particular
system module that was assigned that recognition code will respond to the message.
By communicating data information with other systems on the same serial data link the Body Control Module (BCM) can provide more accurate and
reliable computer system control functions. The BCM uses information from other systems in order to execute some functions. Therefore, before further
diagnosis, review the general information on how the BCM computer system operates and how each system interacts with the BCM. This will save
diagnostic time, avoid future misdiagnosis, and unnecessary parts replacement.
