Regal V6-3.8L VIN K (1997)
4. Position the crankshaft harmonic balancer on the crankshaft.
5. Hold the flywheel with J 37096 or equivalent Flywheel Holding Tool.
Tighten
Harmonic balancer bolt to 150 Nm +76° (110 lb. ft. +76°).
6. Install the right inner fender access cover.
7. Install the right front wheel and tire assembly.
Tighten
Lug nuts to 140 Nm (104 lb. ft.).
8. Lower the vehicle.
9. Install the serpentine belt(so).
10. Connect the negative battery cable.