Regal V6-3.8L VIN K (1997)
B. Align slots using J 41545.
C. Tighten mounting bolts/screws.
-
Tighten bolts/Screws to 25 Nm (18 ft. lbs.).
4. Automatic transaxle range selector lever.
5. Electrical connector.
6. Automatic transaxle range selector lever cable.
Important: After switch installation, verify that engine will only start in "Park" or "Neutral" positions. If engine will start in any other position,
readjust switch and/or check shifter and shifter cable.