Regal V6-3.8L VIN K (1997)
1. Remove the fuel injector sight shield (1). Refer to Fuel Injector Sight Shield Replacement in SI.
Important
It is not necessary to remove the spark plug wires from the spark plugs.
2. Remove the 1-3-5 spark plug plastic retaining channel (cover) clip/bracket (2) from the engine and discard it.
3. If present, remove any plastic (polypropylene) conduit (1) from spark plug wires at the front of the engine (should only be found on spark plug
wires 1 and 5).7mm Four-Wire Retainer, P/N 88891792
