Regal V6-3.8L VIN K (1997)
Cruise Control Module: Service and Repair
Cruise Control Cable Attachment To Module
Cruise Control Module Mounting
CAUTION: Refer to Service Precautions.
The cruise control module is mounted to the left strut tower and must be serviced as a complete unit.
REMOVE OR DISCONNECT
1. Cruise control cable from module.
2. Electrical connector from module.
3. Module to shock tower nuts.
4. Module.
INSTALL OR CONNECT
NOTE: Refer to Service Precautions.
1. Module on mounting studs.
2. Module to shock tower nuts.
Tighten
^
Nuts to 2 N.m (18 lb. in.).
3. Electrical connector to module.
4. Cruise control cable to module.
Adjust
^
Cruise control cable.