buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 14673 > < Air Bag Disarming and Arming
Page 2
background image

With the AIR BAG Fuse (Buick) or SIR Fuse (Pontiac) removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates.
This is normal operation and does not indicate a SIR system malfunction.

Enabling the SIR System

Description

Description

INSTALL OR CONNECT

^

Remove the key from the ignition switch.

1. Passenger yellow 2-way connector and the CPA located near the base of the steering column.
2. Driver yellow 2-way connector and the CPA located at the base of the steering column.
3. I/P insulator (left side).
4. AIR BAG Fuse (Buick) or SIR Fuse (Pontiac) to the I/P fuse block.

^

Staying well away from both air bags, turn the ignition switch to the RUN position. Verify that the AIR BAG warning lamp flashes seven times
and then stays off. If the AIR BAG warning lamp does not operate as described, perform the SIR DIAGNOSTIC SYSTEM CHECK.  See:
Testing and Inspection

Air Bag Disarming and Arming|Page 14673 > < Air Bag Disarming and Arming