Regal V6-3.8L VIN K (1997)
REMOVE OR DISCONNECT
1. Case side cover pan.
2. Clips retaining solenoid.
3. Electrical connector and solenoid.
INSTALL OR CONNECT
NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application.
The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require
thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors)