Regal V6-3.8L VIN K (1997)
Window Regulator Replacement: Front Door - Installation Procedure
1. Install the regulator to the door.
Window Regulator Replacement: Front Door - Installation Procedure
2. Install the window regulator to door mounting bolts in the following sequence.
2.1. Lower rear (1)
2.2. Upper rear (2)
2.3. Lower front (3)
2.4. Upper front (4)
Tighten
Tighten the window regulator to door bolts to 10 Nm (89 lb in).
3. Install the three window regulator motor mounting bolts.
Tighten
Tighten the window regulator motor bolts to 10 Nm (89 lb in).
4. Connect the electrical connector.
5. Remove the tape from the front door window and lower the window onto the window regulator carrier plate.
6. Install the window to regulator bolts.
7. Install the front door water deflector.
8. Install the front door inner trim panel.
Rear Door - Sedan
WINDOW REGULATOR
Rear Door - Sedan
REMOVAL PROCEDURE
