Regal V6-3.8L VIN K (1997)
Wiper Blade: Service and Repair
Description
Remove or Disconnect
1. Turn ignition switch to "ACCY" position.
2. 2 Set wiper switch to "PULSE" position.
3. Turn ignition switch off when wipers are in midwipe.
4. Wiper blade assembly (14) from wiper arm assembly (13).
A. Push in button (C) of wiper blade assembly clip (D) and remove wiper blade assembly (14) from inside radius of wiper arm assembly (13).
B. Bring wiper arm assembly (13) out through opening in wiper blade assembly (14).
Install or Connect
1. Wiper blade assembly (14) on wiper arm assembly (13).
2. operate wipers and check for proper operation.
