Regal V6-3100 3.1L VIN M SFI (1996)
Brake Hose/Line: All Technical Service Bulletins
Service Procedure
1.
Turn steering wheel to full right position.
2.
Raise vehicle.
3.
Inspect left front brake line at transaxle mount bracket and attachment bolt for proper clearance and proper clip position (see Illustration).
4.
If clearance is 13 mm (1/2") or greater for the clip and the line, do not reposition line. Ensure lines are properly secured in clip and clip is in
proper location. Proceed to step # 11.
LACK OF CLEARANCE
5.
If clearance is found to be less than the minimum of 13 mm (1/2") or line is out of clip, inspect line to determine if contact has been occurring with
the transaxle bracket and/or attachment bolt.
A.
If no contact was made or the line only appears shiny (polished), it will only be necessary to reposition the line and ensure proper clip
retention (proceed to step # 6).
