Regal V6-3100 3.1L VIN M SFI (1996)
1. Install new crankshaft sprocket using sprocket installer tool No. J-38612 or equivalent, until sprocket is fully seated on flange of crankshaft.
2. Coat camshaft and crankshaft sprockets with engine oil.
3. Hold camshaft sprocket with chain hanging down and align marks on camshaft and crankshaft sprockets with cast timing marks on engine block,
Fig.8.
4. Tighten bolts to specifications
5. Install front cover, refer to Timing Cover, Replace.
