Regal V6-3100 3.1L VIN M SFI (1996)
^
Nuts to 43 Nm (32 lb. ft.).
CAUTION: When installing the intermediate shaft make sure the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted
into the coupling before shaft Installation, the two mating shafts may disengage.
7. Pinch bolt at intermediate steering shaft.
8. Splash shield.
9. Tire and wheel.
10. Lower vehicle.
11. Left-hand torque strut bracket.
12. Transaxle bracket to bolt/screw.
TIGHTEN
^
Bolt/screw to 48 Nm (35 lb. ft.).
13. Remove J 28467-A and J 36462.
14. Negative battery cable.
15. Air cleaner.
