Rendezvous V6-3.5L (2007)
Important: Observe the routing of the wiring harness (2).
6. Disconnect the wire connector (1).
7. Slightly lift up the DVD player assembly so that the hook can be removed from its resting position.
8. Remove the DVD player from the vehicle.
Installation Procedure
1. Install the DVD player hook (1) into the hook opening.
2. Connect the wire connector (1) to the DVD player assembly.
Important: Ensure the harness is routed to the right side of the large plastic pin (2) as shown.
3. Install the harness retainer to the panel.
4. Swing the rear part of the assembly to the headliner so that the retainer is seated.
Notice: Refer to Fastener Notice in Service Precautions.
