Rendezvous V6-3.5L (2007)
4. Install the seat cushion assembly (1) to the seat riser.
5. Install the fasteners (2) to the seat cushion assembly (1).
6. Adjust the front seat assembly up and forward in order to access the fasteners (1).
Notice: Refer to Fastener Notice.
7. Install the fasteners (1) to the seat cushion assembly.
Tighten the fasteners to 9 N.m (80 lb in).
8. Angle the front seat cushion up, in order to access the assembly fasteners.
Tighten the fasteners to 9 N.m (80 lb in).
9. Enable the SIR. Refer to SIR Disabling and Enabling.
10. Calibrate the seat. Refer to Control Module References for programming and setup information. See: Testing and Inspection/Programming and
Relearning