Rendezvous V6-3.5L (2007)
9. Remove the right front bolts from the seat back recliner hinge.
10. Remove the back from the seat cushion frame. Set the back face down on the front seat cushion.
11. Remove the heated seat wiring harness and the side air bag wire harness. Remove the wiring harnesses through the front seat cushion and frame
area.
12. Remove the seat back from the seat cushion.
Installation Procedure
1. Install the front seat back onto the front seat cushion.
2. Install the wiring harnesses to the heated seat and to the side air bag through the front seat cushion and frame area.
3. Install the back to the seat cushion frame.
Notice: Refer to Fastener Notice .
4. Install the left front bolts to the seat back recliner hinge.
Tighten the bolts to 40 N.m (30 lb ft).
