Rendezvous V6-3.5L (2007)
7. Install the hook and the loop retainers securing the cover to the cushion, by pressing in place until fully seated.
8. Install the seat adjuster.
9. Connect the electrical connector for the heated seat, if equipped.
10. Install the seat back.
11. Install the bucket seat.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
12. Re-zero the passenger presence system. Refer to Passenger Presence System Rezeroing.
