Rendezvous V6-3.5L (2007)
Notice: When removing the brake pressure modulator valve, protect the vehicle exterior from possible brake fluid spillage. Brake fluid can cause
damage to painted surfaces.
15. Remove the 2 nuts (1) that secure the BPMV to the mounting bracket (2).
16. If only replacing the BPMV, remove the EBCM.
Installation Procedure
1. Install EBCM to the BPMV (1, if removed.
2. Install BPMV/EBCM assembly to the mounting bracket.
Notice: Refer to Fastener Notice.
3. Install the 2 nuts (1) securing the BPMV assembly to the mounting bracket (2).
Tighten to 10 N.m (84 lb in).
