Rendezvous V6-3.5L (2007)
Heater Hose: Service and Repair
Heater Hose Replacement - Outlet
Heater Hose Replacement - Outlet
Tools Required
GE-47622 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Remove the wiper motor module assembly.
3. Disconnect the vacuum hose from the brake booster and reposition.
4. Remove the air cleaner outlet duct.
5. Remove the transmission fluid filler tube.
6. Disconnect the outlet heater hose (3) from the outlet heater pipe (4).
7. Disconnect the outlet heater hose clamp using the GE-47622.
8. Disconnect the outlet heater hose from the heater core.
9. Remove the outlet heater hose.
Installation Procedure
1. Install the outlet heater hose.
2. Connect the outlet heater hose to the heater core.
3. Connect the heater hose clamp using the GE-47622.
