Rendezvous V6-3.5L (2007)
Radiator Hose: Service and Repair
Radiator Outlet Hose Replacement
Radiator Outlet Hose Replacement (LX9)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
Important: Use the J 38185 to gently release tension on the hose clamp until the hose clamp lock feature engages allowing removal of the hose.
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Using the J 38185, release tension on the hose clamp at the water pump until the clamp locks.
3. Remove the radiator outlet hose from the water pump.
4. Remove the air cleaner assembly.
5. Using the J 38185, release tension on the hose clamp at the radiator until the clamp locks.
6. Disconnect the radiator outlet hose retainer from the cooling fan shroud.
7. Remove the radiator outlet hose from the radiator.
Installation Procedure
Important: Release the hose clamp retention lock by using a small flat-bladed screwdriver.