Rendezvous V6-3.5L (2007)
2. Install the water outlet.
Notice: Refer to Fastener Notice.
3. Install the water outlet bolts.
Tighten the bolts to 10 N.m (89 lb in).
Important: Ensure that the engine fill neck is aligned in the vertical position.
4. Install the radiator inlet hose to the water outlet.
5. Position the radiator inlet hose clamp at the water outlet.
6. Install the crossover exhaust pipe.
7. Fill the cooling system as needed. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
