Rendezvous V6-3.5L (2007)
1. Position the engine mount strut bracket to the radiator support, if required.
Notice: Refer to Fastener Notice.
2. Install the engine mount strut bracket bolts to the radiator support, if required.
Tighten the bolts to 50 N.m (32 lb ft).
3. Position the engine mount strut/engine lift bracket to the engine, if required.
4. Install the engine mount strut/engine lift bracket bolts, if required.
Tighten the bolts to 50 N.m (32 lb ft).
5. Install the thermostat housing.
6. Install the engine mount strut.