Rendezvous V6-3.5L (2007)
Engine Mount: Service and Repair
Engine Mount Strut Bracket Replacement - Right
Engine Mount Strut Bracket Replacement - Right Side
Removal Procedure
1. Remove the engine mount strut.
2. Remove the engine mount strut bracket bolts from the radiator support, if required.
3. Remove the engine mount strut bracket, if required.
4. If removal of the engine mount strut/air conditioning (AC) compressor bracket is required, perform the following steps.
5. Remove the drive belt.
6. Remove the AC compressor bolts.
7. Remove and set the AC compressor aside.