Rendezvous V6-3.5L (2007)
11. Connect the electrical connector to the evaporator temperature sensor.
12. Connect the electrical connector to the blower motor resistor.
13. Install the blower motor.
14. Tighten the HVAC module assembly to dash panel sound barrier nuts.
Tighten the nuts to 10 N.m (89 lb in).
15. Install the wiper motor module assembly.
16. Fill the coolant system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
17. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging
18. Leak test the fittings of the component using the J39400-A.
