Rendezvous V6-3.5L (2007)
8. Remove the ignition coil bolts/nuts.
9. Remove the ignition coil.
10. Remove the ignition coil studs, if necessary.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the ignition coil studs, if necessary.
Tighten the studs to 25 N.m (18 lb ft).
2. Install the ignition coil.
3. Install the ignition coil bolts/nuts.
Tighten the bolts/nuts to 25 N.m (18 lb ft).