Rendezvous V6-3.5L (2007)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Power Steering Cooler Pipe/Hose Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel assembly.
3. Remove the power steering gear heat shield.
4. Disconnect the wiring harness from the power steering cooler pipe/hose bracket stud.
5. Compress the clamp (1) and disconnect the power steering pump inlet pipe/hose (2) from the power steering cooler pipe/hose (3).
6. Disconnect the power steering cooler pipe/hose from the power steering gear. Discard the O-ring seal.
