Rendezvous V6-3.5L (2007)
Steering Mounted Controls Assembly: Service and Repair
Steering Wheel Control Switch Assembly Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Disable the SIR System. Refer to SIR Disabling and Enabling.
2. Remove the steering wheel.
3. Remove the retaining screws (2, 3) from the steering wheel rear bezel.
4. Remove the steering wheel rear bezel (1).
5. Disconnect the electrical connector.
6. Insert a small, blunt-ended tool into the access hole in the back of the steering wheel. Push the switch out of the steering wheel.
Installation procedure
1. Connect the electrical connector.
2. Align the switch to the opening in the steering wheel.
3. Push the switch into the steering wheel.
4. Install the steering wheel rear bezel (1).
Notice: Refer to Fastener Notice.