Rendezvous V6-3.5L (2007)
Notice: Refer to Fastener Notice.
2. Install the strut upper nuts.
Tighten the strut upper nuts to 30 N.m (22 lb ft).
3. Install the wiper module.
4. Install the strut lower bolts and nuts. Hand tighten only.
5. Install the tire and wheel.
6. Inspect and adjust the camber as necessary.
7. Lower the vehicle.
Suspension Shock/Strut Disposal
Suspension Shock/Strut Disposal
Caution: Gas charged shock absorbers contain high pressure gas. Do not remove the snap ring from inside the top of the tube. If the snap ring
is removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
Caution: To prevent personal injury, wear safety glasses when centerpunching and drilling the shock absorber. Use care not to puncture the
shock absorber tube with the centerpunch.
