Rendezvous V6-3.5L (2007)
8. Install the accumulator cover bolts (131).
Tighten the accumulator cover bolts (131) to 12 N.m (106 lb in).
9. If removed, install a new filter seal.
10. Install the filter.
11. Install the oil pan.
12. Lower the vehicle.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM),
powertrain control module (PCM), or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
13. Reset the TAP values.
