Rendezvous V6-3.5L (2007)
Notice: Refer to Fastener Notice.
2. Install the oil pump bolts (205-207).
*
Tighten the M6 X 1.0 X 20 bolt to 8 N.m (70 lb in).
*
Tighten the M6 X 1.0 X 85 bolt to 12 N.m (106 lb in).
*
Tighten the M6 X 1.0 X 95 bolt to 12 N.m (106 lb in).
3. Install the case side cover.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM),
powertrain control module (PCM), or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
4. Reset the TAP values.
