Rendezvous V6-3.5L (2007)
1. Position the rear washer hose to the inner right side of the vehicle.
2. Route the rear washer hose through the inside of the rear roof panel.
3. Route the rear washer hose through the liftgate rubber conduit.
4. Install the rear washer nozzle.
5. Position the rear washer hose to the right rear quarter panel area and secure with tape.
6. Position the rear washer hose to the right sill area and secure with tape.
7. Install the rear washer hose through the opening in the right side of the instrument panel.
8. Connect the rear washer hose to the rear washer pump.
9. Install the right rear lower quarter trim panel.
10. Install the right lower center pillar molding.
11. Install the right cowl trim panel.
12. Install the right closeout/insulator panel.
