Rendezvous AWD V6-3.4L VIN E (2005)
Front Bumper Cover / Fascia: Service and Repair
Fascia Replacement - Front Bumper - Upper (Rendezvous)
Fascia Replacement - Front Bumper - Upper (Rendezvous)
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the front fender liners. Refer to Front Fender Liner Replacement (See: Fender/Front Fender/Front Fender Liner/Service and Repair) in
Body Front End.
2. Remove the headlamps. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) Headlamp Assembly or Headlamp Bulb
Replacement (Rendezvous) in Lighting Systems.
3. Remove the fog lamps. Refer to Fog Lamp Replacement - Front (Aztek) Fog Lamp Replacement - Front (Rendezvous) in Lighting Systems.
4. Remove the bolts from the front bumper fascia at the fender.
5. Remove the push-in retainers from the upper bumper fascia support using J 38778 .
6. Remove the push-in retainers from the fascia at the front bumper energy absorber using J 38778 .
7. Disengage the ball socket retainer from the ball on the front fender.
8. Remove the fascia from the vehicle.
9. Remove the grille from the fascia. Refer to Fascia Grille Replacement (Aztek) (See: Grille/Service and Repair/Fascia Grille Replacement (Aztek)
)Fascia Grille Replacement (Rendezvous) (See: Grille/Service and Repair/Fascia Grille Replacement (Rendezvous)) .
10. Remove the fascia outer support.
