Rendezvous AWD V6-3.4L VIN E (2005)
4. Install the grommet into the dash using a small flat bladed tool.
5. Install the hood release cable retainers to the engine compartment side rail.
6. Install the hood release cable retainers to the upper tie bar.
7. Connect the hood release cable to the hood latch. Refer to Hood Latch Replacement (See: Hood Latch/Service and Repair/Hood Latch
Replacement) .
8. Install the hood release cable to the hood release handle. Refer to Hood Latch Release Handle Replacement (See: Hood Latch/Service and
Repair/Hood Latch Release Handle) .
9. Pull the carpet back.
10. Remove the block from the hood latch.
11. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls.
12. Install the diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal - Left (See: Radiator Support/Service and Repair/Brace
Replacement - Front Fender Upper Diagonal - Left) .
13. Test the hood release cable for proper operation before closing the hood.
14. Close the hood.
