Rendezvous AWD V6-3.4L VIN E (2005)
1. Install the liftgate latches to the endgate.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the liftgate latches.
Tighten the liftgate latch bolts to 10 N.m (89 lb in).
3. Connect the electrical connectors to the liftgate latches.
4. Install the endgate trim panel. Refer to Trim Panel Replacement - Endgate (See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Trim
Panel Replacement - Endgate) .
5. Close the endgate.
