Rendezvous AWD V6-3.4L VIN E (2005)
Scuff Plate: Removal and Replacement
Door Sill Plate Replacement - Endgate
Door Sill Plate Replacement - Endgate
Removal Procedure
1. Remove the endgate door sill plate.
2. Remove the endgate door sill plate from the endgate sill.
3. Remove the endgate sill plate push-in retainers if required .
Installation Procedure
1. Install the endgate sill plate push-in retainers and the 4-way locator, pressing in place until fully seated.
2. Align the endgate sill plate to the 4-way locator and the push-in retainers.
3. Install the endgate sill plate to the push-in retainers, applying pressure to secure at all tab locations.