Rendezvous AWD V6-3.4L VIN E (2005)
Trim Panel: Service and Repair
Trim Panel Replacement - Rear Quarter Upper (Aztek)
Trim Panel Replacement - Rear Quarter Upper (Aztek)
Removal Procedure
1. Remove the rear roof garnish molding. Refer to Garnish Molding Replacement - Rear Upper (See: Garnish Molding Replacement - Rear Upper) .
2. Remove the rear seat belt guide loop from the rear upper quarter trim panel. Refer to Seat Belt Retractor Replacement - Rear in Seat Belts.
3. Remove the screw from the rear upper quarter trim panel.
4. Remove the push pins from the upper quarter trim.
