Rendezvous AWD V6-3.4L VIN E (2005)
Utility Storage Compartment: Service and Repair
Storage Compartment Replacement - Rear (Rendezvous)
Removal Procedure
1. Open the lift gate.
2. Open the rear compartment storage lid.
3. Remove the seat anchor nuts from the rear storage compartment.
4. Remove the rear storage compartment.
Installation Procedure
1. Install the rear storage compartment to the seat anchor studs
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the seat anchor nuts to the rear storage compartment.
Tighten the nuts to 50 N.m (37 lb ft.)
3. Close the rear storage compartment.
4. Close the lift gate