Rendezvous AWD V6-3.4L VIN E (2005)
5. Remove the front end sheet metal diagonal brace to the inner fender bolt.
6. Remove the front end sheet metal diagonal brace to radiator support bolts.
7. Remove the front end sheet metal diagonal brace.
Installation Procedure
1. Position the front end sheet metal diagonal brace to the radiator support and to the inner fender.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the bolts to the front end sheet metal diagonal brace at the radiator support.
Tighten the front end sheet metal diagonal brace at radiator support bolts to 10 N.m (89 lb in).