Rendezvous AWD V6-3.4L VIN E (2005)
3. Install the bolts to the front end sheet metal diagonal brace at the inner fender.
Tighten the front end sheet metal diagonal brace to the inner fender bolts to 10 N.m (89 lb in).
4. Reposition the cruise control module to the front fender diagonal brace. Refer to Cruise Control Module Replacement in Cruise Control.
5. Reposition the engine coolant reservoir to the front fender diagonal brace. Refer to Coolant Recovery Reservoir Replacement in Engine Cooling.
6. Install the engine coolant heater harness to the front fender diagonal brace, if equipped.
7. Close the hood.