Rendezvous AWD V6-3.4L VIN E (2005)
7. Install the cover to the rear retainer at the side impact airbag.
8. Install the side air bag to the front seat.
9. Install and adjust the cover to the side air bag retainer, by pressing in and pulling down on the cover.
10. Reposition the end flap to the seat back cover.
11. Install the J-hook retainer at the bottom of the seat back cover.
12. Install the back to the front seat.
13. Install the headrest.
14. Install the armrest.
15. Install the bucket seat.
Seat Cushion Heater Element Replacement - Front
SEAT CUSHION HEATER ELEMENT REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front bucket seat.
2. Remove the seat back.
3. Remove the seat adjuster.
4. Disconnect the electrical connector for the heated seat, if equipped.
5. Remove the J-hook retainers at the front of the seat cushion cover.