Rendezvous AWD V6-3.4L VIN E (2005)
Important: Do not touch the adhesive backing.
1. Remove the backing tape from the underside of the spoiler.
2. Install the rear spoiler to the liftgate, pressing into place until the adhesive is fully seated.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the nuts to the rear liftgate spoiler.
Tighten the rear liftgate spoiler nuts to 6 N.m (53 lb in).
4. Install the rear liftgate spoiler water channel.
5. Install the liftgate trim. Refer to Trim Panel Replacement - Liftgate (Aztek) (See: Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Interior Trim Panel/Service and Repair/Trim Panel Replacement - Liftgate (Aztek))Trim Panel Replacement - Liftgate (Rendezvous) (See: Doors,
Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service and Repair/Trim Panel Replacement - Liftgate (Rendezvous)) .