Rendezvous AWD V6-3.4L VIN E (2005)
Tailgate Shock / Support: Service and Repair
Strut Replacement - Endgate
Strut Replacement - Endgate
Removal Procedure
Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or
personal injury.
1. Open the endgate.
Notice: Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.
2. Lift up the retainer clips on the endgate assist rods using a small flat-bladed tool.
3. Remove the upper end of the assist rods from the ball joint.
4. Remove the lower end of the assist rods from the ball joint.