Rendezvous AWD V6-3.4L VIN E (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement - Rear
Wheel Speed Sensor Replacement - Rear
Removal Procedure
1. Important: The rear wheel speed sensors and rings are integral with the hub and bearing assemblies.
If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly.
Raise and support the vehicle on a suitable hoist.
2. Remove the rear tire and wheel assembly.
3. Remove the rear wheel speed sensor electrical connector located next to the rear strut.
4. Remove the hub and bearing assembly (1).
Installation Procedure
