Rendezvous AWD V6-3.4L VIN E (2005)
9. Disconnect the master cylinder brake pipes from the BPMV.
10. Loosen the brake pipes but do not remove the brake pipes from the master cylinder.
11. Swing the 2 master cylinder brake pipes out of the way only after covering the open pipes to avoid dripping or being contaminated.
12. Remove the 2 lower BPMV mounting bracket nuts (2) from the inner wheel housing mount surface of the strut tower.
13. Loosen the top BPMV mounting nut.
14. Remove the BPMV mounting bracket and the EBCM assembly from the vehicle by sliding up and toward the engine to separate from the
wheelhouse slot.
15. Notice: When removing the brake pressure modulator valve, protect the vehicle exterior from possible brake fluid spillage. Brake fluid can cause
