Rendezvous AWD V6-3.4L VIN E (2005)
2. Install the park brake cable to the park brake lever.
3. Install the park brake cable end to the park brake lever clevis.
4. Raise and support the vehicle.
5. Install the park brake cable clips to the park brake cable shielded areas.
6. Notice: Refer to Fastener Notice in Service Precautions.
Install the park brake cable nuts to the underbody studs.
Tighten the park brake cable nuts to 3 Nm (27 inch lbs.).
7. Install the park brake cable to the park brake cable guides.