Rendezvous AWD V6-3.4L VIN E (2005)
Engine Mount: Service and Repair
Engine Mount Strut Replacement - Right
Engine Mount Strut Replacement - Right
Removal Procedure
1. Remove the bolt and the nut from the engine mount strut at the right engine mount strut bracket on the engine.
2. Remove the bolt and the nut from the engine mount strut at the engine mount strut bracket on the upper radiator support.
3. Remove the engine mount strut.
4. Inspect the rubber in the engine mount strut for the following conditions:
^
Hardness
^
Splitting
^
Cracking
Installation Procedure
1. Install the engine mount strut.
2. Install the bolt and the nut to the engine mount strut at the engine mount strut bracket on the upper radiator support. HAND TIGHTEN ONLY.