Rendezvous AWD V6-3.4L VIN E (2005)
4. Install the J 45057 to the right rear engine lift bracket.
5. For Buick vehicles, remove the headlamps.
6. Disconnect the hood strut assist rods from the fenders.
7. Carefully open and secure the hood in a 90 degree position.
8. Install a J 28467-B and retention pin to each end of the J 28467-500 beam (2).
9. Position the J 28467-B to the left and right side inner fender rails in order to install the J 28467-500.