Rendezvous AWD V6-3.4L VIN E (2005)
12. Disconnect the vacuum harness from the MAP sensor and the upper intake manifold.
13. Disconnect and remove the emission control vacuum harness.
14. Disconnect the vacuum brake booster hose from the upper intake manifold.
15. Disconnect the vacuum hose connections from the upper intake manifold:
^
Heating, ventilation and air conditioning (HVAC) vacuum source hose
^
Fuel pressure regulator
16. Remove the MAP sensor and the bracket.
17. Remove generator through bolt bracket.
18. Remove the upper intake manifold studs and bolts.
19. Remove the upper intake manifold.
20. If replacing the intake manifold, remove the throttle body.
