Rendezvous AWD V6-3.4L VIN E (2005)
3. If removed, install the drive belt shield.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the drive belt shield bolt.
^
Tighten the drive belt shield bolt to 10 Nm (89 inch lbs.).
5. Install the engine front cover gasket.
6. Apply sealer GM P/N 12346004, (Canadian P/N 10953480) or equivalent to both sides of the lower tabs of the engine front cover gasket, and the
engine front cover bolts.
7. Install the engine front cover.
8. Install the engine front cover bolts (2).
^
Tighten the engine front cover bolts (2) to 55 Nm (41 ft. lbs.).
9. Install the engine front cover bolts (3).
^
Tighten the engine front cover bolts (3) to 55 Nm (41 ft. lbs.).
10. Install the engine front cover bolts (1).
^
Tighten the engine front cover bolts (1) to 27 Nm (20 ft. lbs.).